Computer Modeling of Radiofrequency Cardiac Ablation including Heartbeat-Induced Electrode Displacement

BackgroundThe state of the art in computer modeling of radiofrequency catheter ablation (RFCA) only considers a static model, i.e. it does not allow modeling ablation electrode displacements induced by tissue movement due to heartbeats. This feature is theoretically required, since heartbeat-induced changes in contact force can be detected during this clinical procedure. MethodsWe built a 2D RFCA model coupling electrical, thermal and mechanical problems and simulated a standard energy setting (25 W - 30 s). The mechanical interaction between the ablation electrode and tissue was dynamically modeled to reproduce heartbeat-induced changes in the electrode insertion depth from 0.86 to 2.05 mm, which corresponded with contact forces between 10 and 30 g when cardiac tissue was modeled by a hyperelastic Neo-Hookean model with a Youngs modulus of 75 kPa and Poissons ratio of 0.49. ResultsThe dynamic model computed a lesion depth of 5.86 mm, which is within the range of previous experimental results based on a beating heart for a similar energy setting and contact force (5.6-6.7 mm). Lesion size was practically identical (differences less than 0.02 mm) to that using a static model with the electrode inserted to an average depth (1.46 mm, equivalent to 20 g contact force). ConclusionsThe RFCA dynamic model including heartbeat-induced electrode displacement predicts lesion depth reasonably well compared to previous experimental results based on a beating heart model, however this is true only at a standard energy setting and moderate contact force.